Attaching A Silicon Graphics Workstation - CYBEX XP4040 Installer/User Manual

Attaching
a Silicon
Graphics
Workstation
4. Follow the instructions for connecting computer interface cables for
IBM PS/2 style computers making sure to attach the VAD-18 between
the VGA video connector on your computer interface cables and your
RS/6000 workstation.
For Indy or Indigo Systems
1. Refer to the section, "Attaching a PC Computer" and follow the in-
structions for configuring and installing your XPAC/XPAB modules.
2. Set the DIP switch on your XPAC/XPAB module as shown below:
Switch 1 Switch 2
Setting Setting
Off Off
Off Off
3. In order to connect the computer interface cables, you will need a
VAD-15 adaptor from Cybex. If you do not have this adaptor, contact
our Sales Department to order one.
4. Follow the instructions for connecting computer interface cables for
IBM PS/2 style computers, making sure to attach the VAD-15 between
the VGA video connector on your computer interface cables and your
Silicon Graphics workstation.
Switch 3
Setting
Off Normal video. Use with monitors that
support sync on green.
On Use sync on green to generate horizontal
and vertical sync
25
Function