CYBEX XP4040 Installer/User Manual page 75

The Serial Port Configuration Menu
From the System Status Menu, press the Down button to reach the Serial Port
Configuration Menu.
This menu displays the settings that the serial port requires your PC to be
configured for. Only the baud rate is user configurable. To change the baud rate,
press the Right button. The following menu appears:
Press the Up and Down buttons to cycle through the available rates. When you
have made your selection, press the Right button to save the changes and
return to the Serial Port Configuration Menu. Press the Left button to return
without saving.
The Link Status Menu
From the Serial Port Configuration Menu, press the Down button to reach the
Link Status Menu.
This menu displays connection information for every port of every slot in the
XP4400. In the sample menu above, port 5 of slot A on the XP4400 is connected
to another XP4400 unit with a chassis address of 65 in slot B, port 12.
To view the connections of another slot and port, press the Right button. The
following menu appears:
Press the Up and Down buttons to select the appropriate slot on the XP4400
chassis. When you have made your selection, press the Right button again. The
following menu appears:
***Serial Port***
Baud Rate:57600
Data Bits:8
Parity:No Stop:1
***Edit Mode***
Baud Rate:57600
Data Bits:8
Parity:No Stop:1
***Link Status***
Slot: A Port: 05
Link: 65-B-12
Select Slot
-> Slot: A
Port: 05
Link: 65-B-12
Select Port
Slot: A
-> Port: 05
Link: 65-B-12
69