Administrator Functions - CYBEX XP4040 Installer/User Manual

Administrator
Functions
There is an administrator for each XPDU module in your system. All
administrator/user configurations apply to the current XPDU module only.
Settings can then be downloaded to other XPDU cards in the system if desired.
To perform any of the following tasks, you must be logged on as the
administrator. If you are using a newly installed XPDU module, or one
without an administrator password defined, you will automatically be logged
on as the administrator.
Administrator Setup
1. Press the Control key twice within one second.
2. Press Alt-tab to reach the User List Menu.
3. Press the F5 function key for admin setup.
4. Enter your desired administrator password and time-out in minutes. The
time-out determines how many minutes of inactivity can elapse before a
user is automatically logged out. A value of 0 keeps you logged on
continuously; 60 is the maximum time-out setting.
5. Press Enter to accept your selections.
Adding and Configuring Computer Channels
1. Press the Control key twice within one second.
2. Press the Insert key to add a channel.
3. Enter the name and channel address for the computer you are adding.
4. Enter the desired scan dwell time for this channel. Dwell time is the length
of time a channel's video remains on-screen before scanning continues.
Program Manager
Command Line
Enter your command above
THE COMMAND LINE MENU
9 6