On-Screen Menu Overview - CYBEX XP4040 Installer/User Manual

On-Screen
Menu Overview
The XPIQ module's on-screen display is made up of three main menus:
To access the Channel List Menu, press Alt-M. Press Alt-tab to cycle through
the remaining menus.
The Channel List Menu
This menu displays the name and address of each server. The gray bar at the
bottom lists all options available from this menu. Use the F11 key to scroll
through these options. See the table below.
Key Sequence Action
F1 Press the F1 key for context sensitive help.
F3 Press F3 for the port settings to configure your channel.
Press enter when configuration has been completed.
Enter Press enter to switch to the highlighted channel.
F11 Press F11 to see more available options.
F4 Press F4 for a quick edit of the selected channel name or address.
Alt-Tab Press Alt-Tab to cycle through the available menus.
Delete Press delete to remove the selected channel.
Insert Press the Insert key to add a new channel to your menu.
F2 Press F2 to bring up the channel set-up menu. From here you
can configure the selected channel's name and address.
(-) Press the keypad (-) key to sort the Channel List by address.
Brackets <> around the Address heading will confirm that the
sort method is active.
(+) Press the keypad (+) key to sort the Channel List by name.
Brackets <> around the Name heading will confirm that the sort
method is active.
Channel List Menu
Administrator Control Menu
Open Session Menu
Baud rates: 19200, 9600, 4800, 2400, 1200
Data bits: 7 or 8
Stop bits: 1 or 2
Parity: None, Even or Odd
Flow control: None, Xon/Xoff, or RTS/CTS
43