CYBEX XP4040 Installer/User Manual page 8

interface (LCI) module. The LCI comes pre-installed in the unit. The remain-
ing 13 slots in the unit may be configured as user consoles, attached comput-
ers, power control or expansion modules.
There are 12 push-buttons on the front panel labeled A through L. These
buttons select the active computer for the local console. The indicator lights
(LEDs) over each push-button reflect the type of activity, if any, that is taking
place on each attached computer. The alphanumeric display in the upper right
hand corner of the front panel shows which computer channel is currently
selected by the local console. Only the local console utilizes the push-buttons
and alphanumeric display. Secondary consoles, which connect to the XP4040
through the rear of the unit, select their active computer via the keyboard.
Secondary consoles, like the local console, have access to every computer in
the XP4040 system.
AC INPUT
90-240 VAC, 47- 63 Hz
1 AMP FAST BLOW
250 VAC
Front Access Rack Mount Model:XP4040R
Cybex also offers a front access model designed for 19 inch rack use. It
supports all the features of the XP4040D Front Access unit.
Rear Access Desktop Model:XP4040ED
The front panel of a rear access model XP4040E features LEDs only. These
LEDs reflect the power and selection status of all of the modules in that unit.
There are no connectors or alphanumeric display on the front of the unit.
There is no LCI (local console interface) module inside the unit. All 14 slots
are available for the installation and configuration of any module in the
system. All users connect through the rear of the unit and change computer
channels via keyboard switching.
LCI MODULE (FRONT ACCESS MODEL ONLY) LCI MODULE (FRONT ACCESS MODEL ONLY)
AC INPUT
90-240 VAC, 47- 63 Hz
1 AMP FAST BLOW
250 VAC
2
AVAILABLE SLOTS FOR OPERATION MODULES AVAILABLE SLOTS FOR OPERATION MODULES