Flash Upgrading - CYBEX XP4040 Installer/User Manual

FLASH
Upgrading
Press the Up and Down buttons to select the port you wish to display
information for. Each transmitter or receiver module has 16 ports available
for connection. When you have made your selection, press the Left button to
return to the Link Status Menu. The link information for the requested slot and
port will be displayed.
The Language Menu
From the Link Status Menu, press the Down button to reach the Language Menu.
This menu displays the language that your menu system is currently being
viewed in. To change to a different language, press the Right button. The
following menu appears:
The old language is shown. Press the Up and Down buttons to select a new
language from the available choices. Press the Right button to save the
changes and return to the Language Menu. Press the Left button to return
without saving.
Like all XP4000 Series units, the XP4400 is FLASH upgradeable. FLASH
technology allows you to upgrade the XP4400's firmware without removing
modules or powering down the system. New firmware revisions are uploaded
into the XP4400 via the serial port on the front panel or through standard serial
connections. All advanced serial port operations are possible through the
XP4400 serial port. For more information on FLASH upgrading XP4000 Series
components, see Chapter 9, Advanced Operations.
***
Language
- ENGLISH -
Select Language
- English -
**** EDIT MODE****
70
***