Chapter 1 - Product Overview; Feature Overview - CYBEX autoview 200 Installer And User Manual

1

Feature Overview

Multiuser
capability
FLASH upgrade
capability
Extensive mouse
support
Plug and play
Remote access
capability
Product Overview
The AutoView 200 allows you to control up to 64 PCs with one keyboard,
monitor and mouse. Each computer can be up to 30 feet away from the
AutoView 200. It also provides you with the added benefit of being able to
add a second user up to 500 feet away from the AutoView system. The
AutoView 200 works with IBM PC/AT and PS/2 systems, and 100% compatible
machines with support for VGA, SVGA, XGA and XGA-II video. PS/2 keyboard
and PS/2 mouse peripherals are supported through the rear of the unit.
The AutoView 200 supports two simultaneous users in the system. Within
the base unit, AutoView 200 performs as a complete 2 x 8 matrix switch,
with both users independently accessing any of the eight attached PCs at the
same time.
The AutoView 200 is FLASH upgradable. This means that you can update
your firmware at any time through a simple serial connection.
The AutoView 200 offers support for numerous mice including: Microsoft
Intellimouse, IBM ScrollPoint, Logitech MouseMan +, Logitech Marble Plus,
Logitech Marble FX and the Kensington Expert Mouse.
The AutoView 200 supports Plug and Play video and is compliant with the
VESA DDC2B standard.
Since the AutoView 200 utilizes a Cybex LongView receiver, your second
user can be as far as 500 feet away from the AutoView 200 unit. Built-in
extension lets you place your second keyboard, monitor and mouse wherever
you need them most.
1