Checking The Connections - Yamaha FZ6-ST Supplementary Service Manual

Hide thumbs Also See for FZ6-ST:
Table of Contents

Advertisement

CHECKING THE CONNECTIONS

EAS00026
CHECKING THE CONNECTIONS
Check the leads, couplers, and connectors for
stains, rust, moisture, etc.
1. Disconnect:
S lead
S coupler
S connector
2. Check:
S lead
S coupler
S connector
Moisture ! Dry with an air blower.
Rust/stains ! Connect and disconnect sev-
eral times.
3. Check:
S all connections
Loose connection ! Connect properly.
NOTE:
If the pin 1 on the terminal is flattened, bend it
up.
4. Connect:
S lead
S coupler
S connector
NOTE:
Make sure all connections are tight.
5. Check:
S continuity
(with the pocket tester)
NOTE:
S If there is no continuity, clean the terminals.
S When checking the wire harness, perform
steps (1) to (3).
S As a quick remedy, use a contact revitalizer
available at most part stores.
1-8
GEN
INFO
Pocket tester
90890-03112, YU-3112

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fz6-stc

Table of Contents