Synchronizing The Throttle Bodies - Yamaha FZ6-ST Supplementary Service Manual

ADJUSTING THE VALVE CLEARANCE/

SYNCHRONIZING THE THROTTLE BODIES

7. Install:
S all removed parts
NOTE:
For installation, reverse the removal procedure.
SYNCHRONIZING THE THROTTLE BODIES
NOTE:
Prior to synchronizing the throttle bodies, the
valve clearance and the engine idling speed
should be properly adjusted and the ignition tim-
ing should be checked.
1. Stand the motorcycle on a level surface.
NOTE:
Place the motorcycle on a suitable stand.
2. Remove:
S seat
Refer to "SEAT".
S front cowling inner panel (left and right)
Refer to "COWLINGS"
S fuel tank
Refer to "FUEL TANK".
S air filter case
Refer to "AIR FILTER CASE".
3. Install:
S vacuum gauge 1
(onto the synchronizing hose 2 )
Vacuum gauge
90890-03094, YU-08030
4. Install:
S air filter case
Refer to "AIR FILTER CASE".
S fuel tank
Refer to "FUEL TANK".
S changing the meter display.
Refer to "FEATURES" in chapter 1.
5. Start the engine and let it warm up for several
minutes.
3-17
CHK
ADJ