Yamaha FZ6-ST Supplementary Service Manual page 108

Fuel pump assembly
1
Fuel tank breather hose (except for CAL)
2
Fuel tank drain hose
3
Fuel hose
4
Clip
5
Clamp
6
Charge hose (for CAL)
7
Roll over valve (for CAL)
8
A Air opening.
B Install the O-ring with its lip pointed upward.
C Fuel tank breather hose has a white point mark.
D Point the knob of clip front side.
CABLE ROUTING
a Fuel piping connector attachment directions. (fuel
pump side)
1. It is inserted until it makes a click sound the connec-
tor, and it checks that a connector does not fail out. It
takes care that a foreign substance does not enter
into a seal portion. (Working gloves should not be
used at the time of work.)
E It prevents that this portion falls out.
2. The clamp is attached from the bottom after the
work of "1".
It checks being completely equipped with
C
section.
2-47
SPEC
A B
, and