Yamaha FZ6-ST Supplementary Service Manual page 183

FRONT WHEEL AND BRAKE DISCS
4-4
2. Check:
S tire
S front wheel
Damage/wear ! Replace.
Refer to "CHECKING THE TIRES" and
"CHECKING THE WHEELS" in chapter 3.
3. Measure:
S radial wheel runout 1
S lateral wheel runout 2
Over the specified limits ! Replace.
Radial wheel runout limit
1 mm (0.04 in)
Lateral wheel runout limit
0.5 mm (0.02 in)
4. Check:
S wheel bearings
Front wheel turns roughly or is loose ! Re-
place the wheel bearings.
S oil seals
Damage/wear ! Replace.
5. Replace:
S wheel bearings
New
S oil seals
New
a. Clean the outside of the front wheel hub.
b. Remove the oil seals 1 with a flat-head
screwdriver.
NOTE:
To prevent damaging the wheel, place a rag 2
between the screwdriver and the wheel surface.
CHAS