Yamaha FZ6-ST Supplementary Service Manual page 23

ENGINE
5. Tighten
• right front engine mounting bolts
6. Install:
• shift arm bolt
NOTE: NOTE:
• Before installing, make sure to align the
punch mark
punch mark of the shift arm.
• Align the bottom edge of the shift pedal with
the mark on the frame-to-swingarm bracket.
17
ENG
55 Nm (5.5 m•kg, 40 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
of the shift shaft with the