Disassembling The Rear Brake Master Cylinder - Yamaha FZ6-ST Supplementary Service Manual

FRONT AND REAR BRAKES
3. Check:
S rear brake fluid reservoir 1
Cracks/damage ! Replace.
S rear brake fluid reservoir diaphragm 2
Cracks/damage ! Replace.
4. Check:
S front brake master cylinder reservoir 1
Cracks/damage ! Replace.
S front brake master cylinder reservoir dia-
phragm 2
Damage/wear ! Replace.
5. Check:
S brake hoses
Cracks/damage/wear ! Replace.
Refer to "CHECKING THE FRONT AND
REAR BRAKE HOSES" in chapter 3.
EAS00589
DISASSEMBLING THE REAR BRAKE
MASTER CYLINDER
1. Remove:
S union bolt 1
S copper washers 2
S brake hose 3
NOTE:
To collect any remaining brake fluid, place a
container under the master cylinder and the end
of the brake hose.
2. Disconnect:
S brake fluid reservoir hose
3. Remove:
S pin (from the brake pedal link)
4. Remove:
S rear brake master cylinder assembly
5. Remove:
S circlip (from the rear brake master cylinder
assembly)
S master cylinder kit
4-29
CHAS