Yamaha FZ6-ST Supplementary Service Manual page 187

FRONT WHEEL AND BRAKE DISCS
a. Spin the front wheel.
b. When the front wheel stops, put an "X
c. Turn the front wheel 90_ so that the "X
d. Release the front wheel.
e. When the wheel stops, put an "X
f. Repeat steps (d) through (f) several times
g. The spot where all the marks come to rest is
3. Adjust:
a. Install a balancing weight 1 onto the rim ex-
NOTE:
Start with the lightest weight.
b. Turn the front wheel 90_ so that the heavy
c. If the heavy spot does not stay in that posi-
d. Repeat steps (b) and (c) until the front wheel
4. Check:
a. Turn the front wheel and make sure it stays at
b. If the front wheel does not remain stationary
4-8
at the bottom of the wheel.
is positioned as shown.
the bottom of the wheel.
until all the marks come to rest at the same
spot.
the front wheel's heavy spot "X".
S front wheel static balance
actly opposite the heavy spot "X".
spot is positioned as shown.
tion, install a heavier weight.
is balanced.
S front wheel static balance
each position shown.
at all of the positions, rebalance it.
CHAS
" mark
1
" mark
1
" mark at
2