Yamaha FZ6-ST Supplementary Service Manual page 175

CHECKING AND CHARGING THE BATTERY
Charging method using a variable-current
(voltage) charger
Charging method using a constant voltage
charger
6. Install:
S battery
7. Connect:
S battery leads
(to the battery terminals)
CAUTION:
First, connect the positive battery lead 1 ,
and then the negative battery lead 2 .
8. Check:
S battery terminals
Dirt ! Clean with a wire brush. Loose con-
nection ! Connect properly.
9. Lubricate:
S battery terminals
Recommended lubricant
Dielectric grease
10. Install:
S fuel tank
Refer to "FUEL TANK".
S front cowling inner panel (left and right)
Refer to "COWLINGS".
S seat
Refer to "SEAT".
3-64
CHK
ADJ