Yamaha FZ6-ST Supplementary Service Manual page 299

EAS00273
CLUTCH
CLUTCH COVER
Order
Removing the clutch cover
Engine oil
Coolant
1 Coolant hose
2 Clutch cable
3 Clutch cable holder
4 Clutch cover
5 Clutch cover gasket
6 Dowel pin
Job/Part
5-46
CLUTCH
: YAMAHA BOND No. 1215
12 Nm (1.2 mSkg, 8.7 ftSlb)
12 Nm (1.2 mSkg, 8.7 ftSlb)
Q'ty Remarks
Remove the parts in the order listed.
Drain.
Refer to "CHANGING THE ENGINE OIL"
in chapter 3.
Drain.
Refer to "CHANGING THE COOLANT" in
chapter 3.
1 Disconnect.
1 Disconnect.
1
1
1
2
For installation, reverse the removal
procedure.
ENG