Yamaha FZ6-ST Supplementary Service Manual page 367

WATER PUMP
EAS00471
DISASSEMBLING THE WATER PUMP
1. Remove:
S water pump cover
S O-ring
S circlip
S impeller shaft
2. Remove:
S water pump seal 1
NOTE:
Remove the water pump seal from the outside
of the water pump housing.
2 Water pump housing
3. Remove:
S oil seal 1
(with a thin, flat-head screwdriver)
NOTE:
Remove the oil seal from the outside of the wa-
ter pump housing.
4. Remove:
S bearing 1
NOTE:
Remove the bearing from inside of the water
pump housing.
5. Remove:
S rubber damper holder 1
S rubber damper 2
(from the impeller, with a thin, flat-head
screwdriver)
NOTE:
Do not scratch the impeller shaft.
6-13
COOL