Yamaha FZ6-ST Supplementary Service Manual page 18

Fuel pump assembly
Fuel tank breather hose (except for CAL)
Fuel tank drain hose
Fuel hose
Clip
Clamp
Charge hose (for CAL)
Roll over valve (for CAL)
Fuel tank protector
Air opening.
Install the O-ring with its lip pointed upward.
Fuel tank breather hose has a white point mark.
Point the knob of clip front side.
CABLE ROUTING
Fuel piping connector attachment directions.
(fuel pump side)
1. It is inserted until it makes a click sound the con-
nector, and it checks that a connector does not
fail out. It takes care that a foreign substance
does not enter into a seal portion. (Working
gloves should not be used at the time of work.)
It prevents that this portion falls out.
2. The clamp is attached from the bottom after the
work of "1".
It checks being completely equipped with
and section.
12
SPEC
,