Yamaha FZ6-ST Supplementary Service Manual page 306

CLUTCH
4. Install:
S friction plates
S clutch plates
NOTE:
First, install a clutch plate and then alternate be-
tween a friction plate and a friction plate.
a. Install the clutch plate and friction plate as
shown in the illustration.
Clutch plate 1 : t=2.3 mm (0.09 in)
Clutch plate 2 : t=2.0 mm (0.08 in)
Friction plate 3
Friction plate 4 : Color/Brown
5. Install:
S pressure plate 1
NOTE:
Align the punch mark b in the pressure plate
with the punch mark a in the clutch boss.
6. Install:
S bearing 1
S pull rod 2
S pressure plate 3
S clutch springs
S clutch pressure plate screw
NOTE:
Tighten the clutch spring bolts in stages and in a
crisscross pattern.
7. Install:
S pull lever
5-53
ENG
8 Nm (0.8 mSkg, 5.8 ftSlb)