Removing The Interference Filter - KitchenAid Pro Line KHWV01RSS Technical Education

REMOVING THE INTERFERENCE FILTER

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the top cover and the control
assembly (see page 4-2 for the proce-
dures).
Interference Filter
4-13
4. Disconnect the three connectors from the
interference filter terminals. NOTE: The
green 2-wire connector has a locking arm
at the bottom that you must press to release
the connector.
5. Remove the two T-20 screws from the in-
terference filter and remove the filter from
the washer.
T-20 Screws
2-Wire
Black White
Connector
Wires