KitchenAid Pro Line KHWV01RSS Technical Education page 51

9. Slide the control panel to the left, remove the
pins from the keyhole slots in the chassis,
and pull the panel away from the unit.
10. Disconnect the 8-wire cable connector
from the board pins and remove the control
panel.
11. Remove the six screws and mounting clips
from the touchpad/LED assembly cover.
12. Lift and remove the touchpad/LED assem-
bly from the control panel.
Touchpad/LED
4-3
8-Wire Connector
Assembly
Mounting Clip
Screw (1 of 6)