KitchenAid Pro Line KHWV01RSS Technical Education page 76

19. Using the procedure in step 14, remove
the two front dampers from the tub.
Front Slot
Front Slots
21. Remove the 15/16˝ hex-washer nut from
the drive pulley and remove the pulley from
the basket shaft (see the top right photo).
Front Slot
4-28
Drive Pulley
22. Mark the edges of the tub clamps with a
pencil so that you can reinstall the clamps
in the same locations later.
23. Use a screwdriver blade, and pry off the
tub clamps.
Tub Clamp
Pencil Marks
Tub Clamp
Drive Pulley Nut
Screwdriver
Pry Clamp Out