KitchenAid Pro Line KHWV01RSS Technical Education page 54

h) Remove the two bottom screws from
the front panel.
i) Lift the front panel and door to release the
pins from the chassis keyhole slots and
remove the panel from the washer.
Bottom Door Panel Screws
5. To remove the bellows:
a) Remove the end of the dispenser tube
from the bellows.
Dispenser Tube
b) Use a 7mm socket, and turn the bellows
retaining clamp screw counterclockwise
until the clamp is loose enough to re-
move from around the bellows (see the
top right photo).
Bellows Retaining
Clamp Screw
c) Remove the bellows retaining clamp.
Remove Bellows
Retaining Clamp
d) Remove the bellows from the front of
the tub.
Remove Bellows
4-6