Normal Sounds - KitchenAid Pro Line KHWV01RSS Technical Education

Favorite
Favorite allows you to store a customized wash
cycle for future use.
To customize a wash Cycle:
1. Select a cycle.
2. Select the desired OPTIONS.
3. Select the desired MODIFIERS (Soil Level,
Temp, and Spin Speed).
4. To save the cycle, press and hold FAVORITE
(approximately 3 seconds) or until a beep
sounds and the letters "SET" are displayed
on your machine.
5. Press START.
6. To reuse this cycle at another time, select
FAVORITE and press START.
Rinse/Spin
Use this cycle to get a rinse and spin only. This
cycle combines fast-speed tumbling and extra
high speed spin. If desired, you can reduce the
spin speed by selecting the speed you want
from the SPIN SPEED modifier.
Rinse/Spin is useful for
• Loads that need rinsing only.
• Adding fabric softener to a load using the
fabric softener dispenser.
Drain/Spin
Use this cycle to drain your washer or to drain
and spin your wash load. The spin speed is
preset to extra high. If desired, you can reduce
the spin speed by selecting the speed you want
from the SPIN SPEED modifier.
NOTE: Loads of synthetics, delicate fabrics,
handwashables, and woolens should be drained
with no spin or low spin to avoid fabric stress.

NORMAL SOUNDS

As with any new product, you will hear sounds
that you are not accustomed to. You may hear
various sounds when the door is locked or
unlocked, and during the washing, rinsing, or
spinning process. Between changes in wash
actions, there will be momentary pauses. You
will hear water spraying and splashing during
the wash and rinse cycles. These new sounds
and pauses are part of normal washer opera-
tion. See "Troubleshooting," page 3-24.
OPTIONS
You can customize your wash by adding Options
to your cycle selections. You can add or change
an option after starting a cycle anytime before
the selected option begins. Not all Options are
available with all cycles.
• See "Laundry Guide," page 3-18 for an
overview of possible options for each Cycle
selection.
• You can select more than one option for a
cycle. Some options cannot be added to
some cycles, for example, Soil Treat cannot
be added to the Rapid Wash cycle.
• If an option is available with a selected cycle,
the light for that option will illuminate when
selected.
• If an option is unavailable with a selected
cycle, there will be a short tone and the
light for that option will not illuminate when
selected.
3-16
Options