KitchenAid Pro Line KHWV01RSS Technical Education page 24

HEATING ELEMENT &
TEMPERATURE SENSOR
A heating element is used to increase the water
temperature during certain wash cycles. The
temperature sensor is used with the heater to
monitor water temperature in the tub.
Heating Element
Temperature
Sensor
DOOR LOCK/SWITCH ASSEMBLY
The Door Lock/Switch Assembly is located on
the right side of the door opening.
Door Switch
The assembly contains a solenoid operated
latching mechanism that will electrically lock
the door during a wash cycle.
Door Switch
INTERLOCK SWITCHES
The front and rear interlock switches are located
immediately behind the toe and rear panels of
the washer. The switches provide a grounding
circuit to the drive motor and heating element
when either panel is removed for servicing.
Door Lock
Switches
3-6
Door Lock
Switches
Rear Interlock Switch