Drain System - KitchenAid Pro Line KHWV01RSS Technical Education

Recommended installation spaciing for
recessed or closet installation, with or
without a pedestal
• For closet installation with a door, minimum
ventilation openings in the top and bottom of
the door are required. Louvered doors with
equivalent openings are acceptable.
1" 27" 1"
1"
(2.5 cm) (68.6 cm) (2.5 cm) (83.8 cm)
(2.5 cm)
A
A. Recessed area
B. Side view - closet or confined area
C. Closet door with vents
*Required spacing
Recommended installation spacing for
cabinet installation, with or without a
pedestal
• For cabinet installation, with a door, the
minimum ventilation openings in the top are
required.
1" 27" 1" 1"
33"
(2.5 cm) (68.6 cm) (2.5 cm) (2.5 cm)
(83.8 cm)
A
A. Front view
B. Side view
C. Cabinet with vents
*Required spacing
2
48 in.
2
(310 cm )*
2
24 in.
2
(155 cm )*
33" 4"
(10.2 cm)
C
B
7" (17.8 cm)*
7" (17.8 cm)*
4"
(10.2 cm)
B C

DRAIN SYSTEM

The washer can be installed using the standpipe
drain system (floor or wall), the laundry tub drain
system, or the floor drain system. Select the
drain hose installation method you need. See
"Tools and Parts," page 2-1.
Standpipe Drain System—
Wall Or Floor (Views A & B)
3"
(7.6 cm)
The standpipe drain requires a minimum di-
ameter standpipe of 2˝ (5 cm). The minimum
carry-away capacity can be no less than 17 gal.
(64 L) per minute.
The top of the standpipe must be at least 30˝
3"
(7.6 cm)
(76.2 cm) high and no higher than 96˝ (2.4 m)
from the bottom of the washer.
A
Laundry Tub Drain System (View C)
The laundry tub needs a minimum 20 gal.
(76 L) capacity. The top of the laundry tub must
be at least 30˝ (76.2 cm) above the floor.
Floor Drain System (View D)
The floor drain system requires a siphon break
that may be purchased separately. See "Tools
and Parts," page 2-1.
The siphon break must be a minimum of 28˝
(71 cm) from the bottom of the washer. Additional
hoses might be needed.
2-3
30" min.
(76.2 cm)
28" min.
(71 cm)
30" min.
(76.2 cm)
C
B
D