24. Lift the rear half of the tub off the front
half.
25. Lift the basket from the front half of the
tub.
Basket
Front Half Of Tub
Rear Half Of Tub
4-29
26. To replace the heater element wire holder,
remove the T-20 screw.
27. To replace the tub gasket, pry the gasket
out of the slot and remove it. NOTE: The
basket hub is molded into the rear half of the
tub. If it is worn and needs to be replaced,
you will need to replace the rear half of the
tub.
Heating Element
Wire Holder
Basket Hub
Tub Gasket
Continued on the next page.