Removing The Door Lock & Door Switch Assembly - KitchenAid Pro Line KHWV01RSS Technical Education

REMOVING THE DOOR LOCK & DOOR SWITCH ASSEMBLY
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the top cover (see page 4-2 for
the procedure).
4. Open the washer door.
5. Remove the three screws from the door
lock and door switch assembly, and push
the assembly out of the panel cutouts.
6. Accessing the door lock and door switch
assembly from the top of the washer, dis-
connect the 2-, 3-, and 4-wire connectors
from the switch terminals, and remove the
door lock and door switch assembly from
the unit.
Connector
Door Switch
(1 Screw)
Door Lock
Switches
(2 Screws)
4-4
3-Wire
Connector
4-Wire
Door Lock & Door
Switch Assembly
2-Wire
Connector