P-P Connection (Isdn: E-Mail); Figure 2.3 P-P Connection (Isdn: E-Mail) (Using The Network Connected To A User Port) - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 2 Before Using the REMCS Service
2.2 Connection Configuration for Connecting to the REMCS Center
FIGURE 2.1 Internet connection (using the network connected to the user port)
Using a network not connected to the user port
FIGURE 2.2 Internet connection (using REMCS port)
connect to a network other than that connected to the user port. The SMTP server of an ISP (Internet Service
Provider) cannot be specified.
Remarks
- The IP address of [Maintenance Port] must be set from the Web-UI of the MMB.
- Be sure to specify the SMTP server with the IP address.

2.2.2 P-P connection (ISDN: e-mail)

Use a P-P system using a line such as an ISDN line for communication with the REMCS Center.
Through the network connected to a USER port

FIGURE 2.3 P-P connection (ISDN: e-mail) (using the network connected to a USER port)

configuration that uses the network connected to a USER port.
FIGURE 2.2 Internet connection (using REMCS port)
shows a configuration that uses the REMCS port to
4
shows a
CA92344-0542-02