Table 6.23 Message In The [Sending Hardware Configuration Information] Window; Table 6.24 Message In The [Sending Software Configuration Information] Window; Table 6.25 Messages In The Ce Initial Frame - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
RMG_0061
RMG_0062
RMG_0063
RMG_0064
RMG_0092

TABLE 6.23 Message in the [Sending Hardware Configuration Information] window

Message code
RMG_0002
RMG_0004
RMG_0130
RMG_0132
RMG_0133
RMG_0136
RMG_0138
RMG_0140

TABLE 6.24 Message in the [Sending Software Configuration Information] window

Message code
RMG_0002
RMG_0004
RMG_0131
RMG_0134
RMG_0135
RMG_0137
RMG_0139
RMG_0141
Message code
RMG_0002
RMG_0004
completed.
Temporary disconnection to the REMCS
Center completed.
Temporary disconnection frame display
completed.
Reconnection frame display completed.
Execute reconnection to the REMCS Center.
Are you sure?
Registration has not executed, Setup is
incomplete.
Message
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Sending Hardware Configuration Information
frame display completed.
Sending hardware configuration information
completed.
Failed to send hardware configuration
information. (xxx)
Send hardware configuration information to
the REMCS Center.
Execute hardware configuration information
sending. Confirm sending result on event log
display frame.
Hardware configuration information sending
started.
Message
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Sending Software Configuration Information
frame display completed.
Sending software configuration information
completed.
Failed to send software configuration
information. (xxx)
Send software configuration information to the
REMCS Center.
Execute software configuration information
sending. Confirm sending result on event log
display frame.
Software configuration information sending
started.

TABLE 6.25 Messages in the CE initial frame

Message
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
61
Click the [OK] or [Cancel]
button.
Retry after registration is
complete.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
Check whether the network
status is normal.
Click the [OK] or [Cancel]
button.
Confirm sending result on
event log display frame.
None.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
Check whether the network
status is normal.
Click the [OK] or [Cancel]
button.
Confirm sending result on
event log display frame.
None.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
CA92344-0542-02