Communication Error Messages (Smtp Communication); Table 6.34 Messages In The [Replacement To The Previous Certificate] Window; Table 6.35 Messages In The [Display Of Certificate] Window; Table 6.36 List Of Communication Error Messages (Smtp Communication) - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 6 REMCS Messages

6.2 Communication Error Messages (SMTP Communication)

TABLE 6.34 Messages in the [Replacement to the previous certificate] window

Message code
RMG_0001
RMG_0002
RMG_0004
RMG_0041
RMG_0216
RMG_0220
RMG_0221
RMG_0222
Message code
RMG_0002
RMG_0004
RMG_0223
6.2 Communication Error Messages (SMTP Communication)
The following list shows the error messages displayed in the windows when communication errors occur.
The communication error messages also indicate the action to be taken. Handle errors by referring to this
information. If the problem is not solved even if action is taken, contact the support center.
In messages, RL indicates the return value of the REMCS library, and ML indicates the return value of the e-
mail sending part.

TABLE 6.36 List of communication error messages (SMTP communication)

Message code
RMG_2000
RMG_2001
RMG_2002
RMG_2003
RMG_2004
Message
Failed to get Machine status.(xxx)
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Failed to setting Machine status.(xxx)
The certificates will be replaced. Once the
replacement of certificates proceeds, the
report to the REMCS center will not be done
until connected confirmation is completed.
Are you sure?
The frame display of the previous certificate
restoration has been completed.
Failed to restore to the previous certificate.
(xxx)
The restoration to the previous certificate has
been completed.

TABLE 6.35 Messages in the [Display of certificate] window

Message
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
The frame display of the certificate has been
completed.
(SMTP)There is no valid E-Mail address.
The E-Mail address is not set up correctly.
RL:xxx,ML:xxx
(SMTP)Insufficient memory to run this operation.
Please quit unnecessary applications, and try again.
RL:xxx,ML:xxx
(SMTP)File access error. There is no file. Please confirm
following check.
- Please check whether /var capacity is sufficient.
RL:xxx,ML:xxx
(SMTP)Communication timeout error was detected.
Please try again after several minutes.
When you do not solve the trouble, please check the network
between the mail(SMTP) server, and check whether the SMTP
server is running.
RL:xxx,ML:xxx
(SMTP)An error was detected by the specified mail(SMTP)
Message
65
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Click the [OK] or [Cancel]
button.
None.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
CA92344-0542-02