Figure 5.3 [Environment Settings] Window In Case Of P-P Connection; Table 5.3 Items In The [Environment Settings] Window In Case Of P-P Connection - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 5 CHAPTER 5 REMCS Service Detail Settings
5.2 Detail Environment Settings

TABLE 5.3 Items in the [Environment settings] window in case of P-P connection

Input item
E-Mail settings
Timeout
Retry Count
Retry interval
SMTP/PROXY server
PORT No.
Type of encrypted
connection
Connection control
IP version priority
Others
Sender E-Mail
Address
Large data
transmission method
Split size

FIGURE 5.3 [Environment settings] window in case of P-P connection

Maximum
number of
digits
4
2
3
128
5
-
-
128
-
3
Input
Required Enter the timeout trigger for E-Mail (seconds)
in single-byte numeric characters.
Range: 60 to 3600
Required Enter the retry count for E-Mail in single-byte
numeric characters.
Required Enter the retry interval for E-Mail in single-
byte numeric characters.
Range: 1 to 600
Required Enter the name of SMTP/PROXY server or
IP address in single-byte numeric character
and alphabets
Required Enter the port number of the SMTP server in
single-byte numeric characters.
Initial value: 25 (Well Known Port is used.)
Range: 1 to 65535
Required Select type of encrypted connection of SMTP
over SSL from 'none' (default), 'STARTTLS'
and 'SSL/TLS'
Select the priority of IP version from 'none',
Required
'IPv4 (default)' and 'IPv6'
Required Enter the e-mail address of originator in
single-byte numeric characters and
alphabets.
Select dividing method from 'none', 'event
Required
dividing' (default).
Required (*1) Enter dividing size in single-byte numeric
characters.
- mail
Default: 64 KB
Range: 10 to 100 KB
- event
Default: 512 KB
Range: 64 to 512 KB
47
Description
CA92344-0542-02