Table 6.16 Message In The [Customer Information Review] Window; Table 6.17 Message In The [Information Transmit Agreement] Window - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
RMG_0006
RMG_0015
RMG_0018
RMG_0029
RMG_0036
RMG_0065
RMG_0066
RMG_0068
RMG_0069
RMG_0070
RMG_0071
RMG_0072
RMG_0073
RMG_0074
RMG_0075
RMG_0076
RMG_0181
Message code
RMG_0001
RMG_0002
RMG_0004
RMG_0041
RMG_0067
RMG_0077
RMG_0078

TABLE 6.17 Message in the [Information Transmit Agreement] window

Message code
Failed to get connect mode. (xxx)
Invalid entry.
Failed to get registration data. (xxx)
Invalid length.
Required entry.
Failed to get customer information.(xxx)
Customer Information setting frame display
completed.
Invalid character specified in [Company
Name].
Invalid character specified in
[Department/Division].
Invalid character specified in [Address].
Invalid character specified in [Building].
Invalid character specified in [Administrator
Name].
Invalid character specified in [Machine
Installation Site]
Invalid character specified in [Machine
Installation Building].
Characters that cannot be specified are
included in the [Company Name(kana)] of
customer information.
Characters that cannot be specified are
included in the [Administrator Name(kana)] of
customer information.
Invalid E-mail address specified.

TABLE 6.16 Message in the [Customer Information Review] window

Failed to get Machine status. (xxx)
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Failed to setting Machine status.(xxx)
Customer Information frame display
completed.
Failed to register customer information. (xxx)
Customer information registration completed.
Message
Message
58
window and try again. If the
problem is not solved,
contact the support center.
Correct the entered value.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Enter a valid length.
Enter a valid value.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
Confirm the valid characters
and correct the entry.
Enter a valid value.
Action
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
Confirm that HOSTNAME is
specified in the MMB
Network Interface setting. If
the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
None.
Action
CA92344-0542-02