Table 6.13 Messages In The [Point-To-Point Connection Environment Settings] Window - Fujitsu Primequest 2000 Series Installation Manual

CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
RMG_0042
RMG_0043
RMG_0044
RMG_0056
RMG_0095
RMG_0181
RMG_0189
RMG_0207
RMG_0208

TABLE 6.13 Messages in the [Point-to-Point Connection environment settings] window

Message code
RMG_0001
RMG_0002
RMG_0004
RMG_0006
RMG_0015
RMG_0018
RMG_0028
RMG_0037
RMG_0041
RMG_0056
RMG_0079
RMG_0080
RMG_0081
Internet(Mail Only) connection environment
setting frame display completed.
Failed to set REMCS environment (Internet
connection(Mail only)). (xxx)
Registration of REMCS environment data
(Internet connection(Mail only)) completed.
Failed in the connection check notification.
(xxx)
Connection type mismatch.
Invalid E-mail address specified.
Execute registration of REMCS environment
data.After this operation, all events are not
sent to the REMCS Center until connection
check is completed.
\nAre you sure?
Invalid value in [Split size].Please specify it
within the range of 10-100.
Invalid value in [Split size].Please specify it
within the range of 64-512.
Message
Failed to get Machine status. (xxx)
Failed to make frame screen data. (xxx)
Invalid CGI parameter specified.
Failed to get connect mode. (xxx)
Invalid entry.
Failed to get registration data.(xxx)
Input all entries.
Execute registration of REMCS environment
data.
Are you sure?
Failed to setting Machine status.(xxx)
Failed in the connection check notification.
(xxx)
Point-to-Point Connection environment setting
frame display completed.
Failed to set REMCS environment(Point-to-
Point).(xxx)
Registration of REMCS environment data
(Point-to-Point) completed.
None.
Confirm the FQDN or IP
address of the specified
SMTP server.
Also check whether the
network status is normal.
None.
Check whether the network
status is normal.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Enter a valid value.
Click the [OK] or [Cancel]
button.
Enter a valid value.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Correct the entered value.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Fill in any blank entries.
Click the [OK] or [Cancel]
button.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
Check whether the network
status is normal.
None.
Confirm the FQDN or IP
address of the specified
SMTP server.
Also check whether the
network status is normal.
None.
56
Action
CA92344-0542-02