Connection Guide; Connecting The Monitor; Connecting Video Inputs; Connecting To A Network - Honeywell HRDP4F250 User Manual

Installation

Connection Guide

Connecting the Monitor

Connecting Video Inputs

Connecting to a Network

Connecting Audio

______________________________________________________________________________________________
22
There are two available monitor outputs on the Performance Series DVR.
• Composite Monitor output for CCTV monitor – BNC (Marked MAIN)
VGA output for VGA monitor – Mini-Sub D15
•
The Performance Series DVR comes with 4 BNC video inputs on the rear of its
chassis.
Use the RJ45 jack on the rear of the DVR when connecting to a network.
To record audio on the DVR connect the audio source to the Audio In Port
(White) on the back of the chassis.
To listen to live or recorded audio connect the Audio Out Port (Red) to an
amplified speaker system.
Note The DVR audio output is a line level source which requires an
amplified speaker system. The audio input can be from an amplified
source or directly from a microphone. There are three additional
audio inputs on the rear-panel terminal block.
RJ45