Removing A Jammed Tape Cartridge - Silicon Graphics POWER CHALLENGE User Manual

Appendix B: Maintaining Drives
112

Removing a Jammed Tape Cartridge

The following instructions are intended to help you if a tape cartridge
becomes jammed in the DLT and will not unload. In the case of a stacker that
fails to unload, note that a full magazine precludes the tape from unloading.
Before calling your service provider, you should try the following:
1. Power the unit off and then on again, and then try pushing the unload
button again.
2. Power the unit off and on again while pressing on the unload button.
If these steps fail, contact your system administrator or service provider for
assistance.