Illumination; Led Lamp Housing Lh113 - Leica DM2700 M Instructions Manual

6.6 Illumination

Caution!
Be sure that the lamp housing is disconnect-
ed from the power supply. Unplug the power
plug and the power supply during assembly.
Caution!
Light sources pose a potential irradiation risk
(glare, UV radiation, IR radiation). Therefore,
lamps have to be operated in closed hous-
ings and only after being mounted.

6.6.1 LED Lamp Housing LH113

Note:
The Leica DM2700 M microscope is designed for
the LED lamp housing LH113 (order no. 11 504 199)
(Fig 10) .Connection of lamp housings, other than
LED type, are not supported by microscope out-
lets.
Fig. 10 LED lamp housing LH113
Note:
A separate lamp power supply is neccessary to
connect other lamp housings.
• Place the lamp housing in the transmitted light
lamp housing receptacle (11.2) or incident light
lamp housing receptacle (11.1) and fasten it
with the clamping screw on the side.
• Connect the lamp housing to the power sup-
ply for incident light (11.3) or transmitted light
(11.4).
Fig. 11 Rear view of the microscope
1 Incident light lamp housing receptacle
2 Transmitted light lamp housing receptacle
3 Lamp connection for incident light
4 Lamp connection for transmitted light
3
4
6. Assembling
1
2
25