Connection To The Power Supply - Leica DM2700 M Instructions Manual

6. Assembling

6.12 Connection to the Power Supply

• After completing the assembly work, connect
the microscope to the power supply using the
power cable supplied (27.1).
• When using the lamp housing or the external
power supply unit, connect them to the power
supply, too.
Caution!
Only use original power cord, or alternate
VDE- / HAR-certifi ed power cords which
meet the minimum requirements of 3x0,75mm
and 10A/250V.
Fig. 27 Rear side of the Leica DM2700 M
1 Power supply connection
34
2
1