Eyepieces - Leica DM2700 M Instructions Manual

8.5 Eyepieces

Note:
The eyepiece's aperture protector must be re-
moved or folded back, during microscopy while
wearing eyeglasses.
We recommend that users take off glasses with
bifocal or progressive-addition lenses when
working with the microscope.
• For the adjustable tubes with documentation
output, choose the 100% VIS position.
Fig. 49 HC L tube product line
1 Binocular observation tube HC LB 0/3/4
2 Ergonomic tube HC LVB 0/4/4, binocular,
viewing angle 0-35°
additional Ergotube (short) HC -/0/4,
adjustable 7.5°-32.5°
3 Trinocular tube H L1T 4/5/7, with fi xed beamsplitter
(50% / 50%)
4 HC L1VT 0/4/4 like 3,
but with adjustable viewing angle of 0-35°
5 Photo adapter, with 2 exits (50% / 50%)
6 Photo TV exit
1
3
2
6
4 5
Eyepieces with Inlaid Reticle
• Focus the reticle by adjusting the eye lens.
• Focus on the object through this eyepiece.
• Then, close that eye and focus on the object by
adjusting only the second ocular.
Correction for Vision Problems
• With your right eye, look through the right eye-
piece and bring the specimen into sharp focus.
• Then, with your left eye, view the same speci-
men and rotate the left eyepiece tube until the
object is brought into sharp focus. Do not use
the focus dial!
8. Operation
49