Condenser - Leica DM2700 M Instructions Manual

6.2 Condenser

• Screw the condenser head into the condenser
where applicable.
• Using the condenser height adjuster (8.3), turn
the condenser holder (Fig. 7) all the way down.
• Unscrew the clamping screw for the condens-
er (8.2) far enough so that the condenser can
be inserted from the front.
• From the front, insert the condenser into the
condenser holder as far as it will go. On the
underside of the condenser, there is an orien-
tation pin which must engage in the guiding
notch (7.1).
• Pull the condenser's clamping screw (8.2) so
that the condenser is locked in place.
Fig. 7 Condenser holder
1 Guiding notch
1
Note:
The condenser must be centered before using
the microscope.
→ Köhler illumination p. 35.
Fig. 8 Condenser holder
1 Condenser centering
2 Clamping screw for condenser
3 Condenser height adjuster
3
1
6. Assembling
3
2
1
23