How To Run The Registration Update - Neopost in-600 Series User Manual

Additional information
After installing your Mailing System, you will want to add funds to the PSD so you can begin
to process mail. See
Performing the Update Registration Procedure to Change
your Address
This procedure is to be used if you have changed address.
First contact your Customer Service to update your details, then you will be instructed to
perform the update registration procedure.
Updating Registration
Check that your Mailing System is connected to the network before starting.

How to Run the Registration Update

To run the registration update:
1. As supervisor (see
Press
Maintenance
A confirmation message is displayed.
2. Press [OK].
3. Select Update registration (or type 6)
4. Connect your USB memory key and press [OK].
5. Select the new town die and press [OK].
The update registration processes is finished and your new zip code will print in the
postal imprint.
6. When required, type your registration PIN.
7. Press [OK] to start the connection to postal services.
8.
Press after the call is completed.
Adding Funds on page 81
How to Log in as Supervisor
and type 7.4 or select the path:
Processes
on page 154):
10
223