Neopost in-600 Series User Manual page 51

3. Withdraw the envelope from the WP and insert it into the mail path against the
rear-guide wall, with the side to be printed facing upwards.
3
4. The Mailing System prints postage and the mail piece (or label) is sent to the catch
tray.
If you want to print several identical labels:
1.
Press
Make sure there is enough labels are available in the label dispenser (see
Label Dispenser
2.
Press
46
If a mail piece is bigger than mail path maximum thickness, press
to print a label. The label is printed.
To know the maximum thickness, see
241
When using sealer, collect the mail piece stack in the catch tray
and put stack aside to let envelopes dry.
and enter the number of labels.
on page 76).
to print the labels.
Mail Specifications on page
Filling the