How To Run The Registration Update - Neopost IS-330 User Manual

Performing the Update Registration Procedure to Change
your Address
This procedure is to be used if you have changed address.
First contact your Customer Service to update your details, then you will be instructed to
perform the update registration procedure.
Updating Registration
Check that your Mailing System is connected to the network before starting.

How to Run the Registration Update

To run the registration update:
1. As supervisor (see
10
Press
Maintenance
A confirmation message is displayed.
2. Press [OK] .
3. Select Update registration (or type 6 )
4. Press [OK] to start the connection to postal services.
5.
Press
6. Press [OK] to select the displayed GEOCode.
The update registration processes is finished and your new postal code will print in
the postal imprint.
192
How to Log in as Supervisor
and type 7.4 or select the path:
Processes
after the call is completed.
on page 126 ):