Neopost in-600 Series User Manual page 87

3. If the system asks for a PIN code, enter the code using the keypad and press [OK].
The Funds Screen is displayed.
4
By default, the system displays the value of the previous transaction.
4. Enter the amount of postage to add using the keypad (use C to clear a digit, press C
twice to clear the field).
5. Press [OK] to start the connection to the Postal Server.
If the funding process is successful, the system displays a successful message.
If funding fails, the system displays a failure message and the amount that you may
actually add, depending on your postal account balance.
6. You can open the Funds Used / Funds Available screen to check your account balance
once the transaction is complete (see
80).
See also
• As supervisor, you can set the Mailing System to ask for a PIN code for crediting:
see How to Set/Cancel a Funding PIN Code
82
In the case of a communication error, the amount previously entered
cannot be changed. Check connection settings (see
Settings on page 183).
How to Check the PSD (Meter) Funds
on page 167.
Connection
on page