Postage Imprint Default Settings; How To Change The Default Rate - Neopost in-600 Series User Manual

8.9 Postage Imprint Default Set-
tings
The settings of the postage imprint 'by default' include:
• Stamp default settings: sets the default rate, text and ad die for mailing operations
• Automatic Date Advance: enables early date change to continue printing postage
with the new date after post office closing hours
• Fractional mode: enables entering fractional postage values manually
• Printing offset: sets the default offset print position from the right side of the envelope.
Stamp Default Settings
You can set default parameters for the stamp elements that follow:
• Rate
• Text
• Ad Die
You can create up to nine custom text messages.
On list screens, a mark
Changing the Default Rate
Use the procedure below to change the rate the machine activates at start-up.

How to Change the Default Rate

To change the default rate:
1. As supervisor (see
Press
Default user settings
2. Select the default rate using the rate wizard.
3. Press [OK] to validate.
See also
Managing Postal Rates
•
indicates the default parameter.
How to Log in as Supervisor
and type 3.3.3 or select the path:
Default imprint parameters
on page 202
on page 154):
Default rate
8
175