Steps To Run Ppi - Neopost IS-6000 User Manual

Running PPI
After completing the initial set up in
below to run mail.

Steps to Run PPI

Steps to Run PPI
Steps to Set Up PPI Printing
From the Imprint Type:[
1
Start a new Operational PPI Report if necessary.
Press Reset/Report to open the Operational PPI Report
screen and start a new report.
You can also print the current report before starting the new
one.
For details, see
p.160 .
2
Select the sealing mode that corresponds to your mail stack:
see
Checking the Sealing Mode p.51
3
Change the printing date if necessary.
Press the Date area on the screen to select the date.
For details, see p.88 .
4
Depending on the weighing mode selected, run mail ac-
cording to one of the sections below:
Steps to Run Mail in Dynamic Weighing Modes
Running Mail in Standard Weighing Mode
Running Mail in Manual Weighing Mode
PPI ] home screen:
Operational PPI Report and Historic Reports
p.62 , follow the steps
.
p.54
p.55
p.59 .
3
65