How To Run The Installation Wizard - Neopost IS-280 User Manual

Running the Installation Wizard
This type of call should only be completed upon request from Customer Service. Check
that your mailing system is connected to the LAN or to a telephone line before starting.

How to Run the Installation Wizard

To run the installation wizard logged as Supervisor (See
on page 136 ):
1. Either:
Press
Or
Select the path:
A confirmation message is displayed.
2. Press [OK] .
3. Select Installation process (or type 1 )
4. Enter or select the required parameters on each screen and press [OK] .
5. Press [OK] to complete the installation process and return to the supervisor main
menu.
Running the Installation Wizard
After installing your Mail System, you will want to add fundss to the PSD so you can begin
to process mail. See
and type 7.4
Maintenance Processes
Adding Funds on page 68
How to Log in as Supervisor
11
197