Inserter Mode; How To Activate The Inserter Mechanical Connection; How To Set The Inserter Mechanical Connection As Default - Neopost IS-6000 User Manual

Inserter Mode

8.14 Inserter Mode

You can connect an inserter to your mailing system. If you have the electronic con-
nection option, the inserter drives automatically the mailing system. This electronic
connection uses an RS232 cable between the inserter and the base of the mailing
system.
If the mailing system and the inserter are not electronically connected, you need to
activate the "Inserter Mode ON" to use the mailing system with the inserter.
As supervisor, you can set the "Inserter Mode ON" as the default mode.
Activating an Inserter Mechanical-only (Physical) Connection

How to Activate the Inserter Mechanical Connection

How to Activate
the Inserter Me-
chanical Con-
nection
Setting the Inserter Mechanical Mode (Physical) as Default
Follow the procedure below to permanently work with an inserter without electronic
connection.

How to Set the Inserter Mechanical Connection as Default

How to Set the
Inserter Me-
chanical Con-
nection as
Default
1
As user:
Press
> Batch settings > Inserter mode
2
Select ON or OFF and press [OK] .
The inserter mode is activated or deactivated.
1
As supervisor (see
From the main menu, type
> Default user settings >Base settings > Default inserter
mode
2
Choose Enable or Disable and press [OK] .
The Inserter Mode is activated or deactivated by default.
and type 3.11 or select the path:
How to Log in as Supervisor
3.2.7
p.196 ):
or select the path:
8
235