Identification Labels - WEG MW500 User Manual

General Information

2.4 IDENTIFICATION LABELS

There are two identification labels: one complete name plate, located on the side of the
drive and a simplified label inside the drive shown in
the plug-in module allows the identification of the most important characteristics of the
drive, even in drives mounted side-by-side. For further details about the position of the
labels, see figure A.2
MW500 model
WEG part number
Rated input data (voltage,
current and frequency)
MW500 model
WEG part number
Serial number
Figure 2.2 (a) and (b): Description of the identification labels on the MW500
6 | MW500
and A.3 of Appendix
(a) Side label of the MW500 (Inside the drive)
(b) Simplified internal label (over the plug-in module)
figure 2.2. The simplified label over
A.
- English -
Serial number
Manufacturing date
Rated output data
(voltage, current and
frequency)
Manufacturing date