WEG MW500 User Manual page 4

Summary of Reviews
The information below describes the reviews made in this manual.
Review
1
NOTE!
The inverters MW500 have the default parameters set as described below:
50 Hz for models with internal filter (check the smart code E.g.:
„
MW500B06P5T4).
ATTENTION!
Check the frequency of the power supply.
In case the power supply frequency is different from the default frequency
(check P0403), it is necessary to set:
P0204 = 5 for 60 Hz.
„
P0204 = 6 for 50 Hz.
„
It is only necessary to set these parameters once.
Refer to the programming manual of the MW500 for further details about
the setting of parameter P0204.
Description
First edition
Chapter
-